Plasterer Safe Work Method Statement ( SWMS) (Australia ) Form. There are specific activities defined as high risk construction work (HRCW). This document advises employers and self-employed people how to prepare a safe work method statement ( SWMS ) for these activities to ensure workers’ safety on construction sites.
The SWMS should be kept available at the location of the HRCW, where it can be readily referenced by affected persons, or reviewed and revised as necessary. A SWMS is a written document that sets out the high risk work activities to be carried out at a workplace, the hazards and risks arising from these activities and the measures to be put in place to control the risks. It sets out the hazards that may arise from these activities and safety measures put in place to control the risks. Your safe work method statement ( SWMS ) template. SWMS is given to the principal contractor before the.
SWMS ) is prepared before the proposed work starts 2. See full list on worksafe. The primary purpose of a SWMS is to help supervisors, workers and any other persons at the workplace to understand the requirements that have been established to carry out the high risk construction work in a safe and healthy manner. Both simple and complex activities can be broken down into a series of basic steps that will allow for full analysis of each part of the activity for.
When preparing a SWMS the following must be taken into account: 1. WHS management plan prepared by the principal contractor. A PCBU that carries out high risk construction work must ensure a SWMS is prepared or has already been prepared by another person before the proposed work commences. If more than one PCBU is involved then each PCBU must, so far as is reasonably practicable, consult, cooperate and coordinate activities with all other PCBUs. A PCBU (in consultation with workers who will be directly engaged in the high risk construction work) is best placed to prepare the SWMS because they understand the work bein. A generic SWMS may be prepared and used for work activities that are carried out on a regular basis.
The content of this type of SWMS may be refined over a number of years and include consultation with workers and other PCBUs. Prior to each new activity, the SWMS must be reviewed and revised to ensure it applies to the high risk construction work and the actual workplace. All PCBUs who are involved in high risk construction work must develop and implement arrangements to ensure the work is carried out in accordance with the SWMS. These may include: 1. SWMS to see if they understand what has to be done). If the work is not being carried out in accordance with the SWMS : 1. A PCBU must ensure that all workers who will be involved in high risk construction work are provided with information and instruction so they: 1. For example, this information and instruction may be provided during induction training, workplace-specific or during a toolbox talk by principal contract.
The SWMS must be kept and be available for inspection until at least the high risk construction work is completed. Where a SWMS is revise all versions should be kept. If a notifiable incident occurs in relation to high risk construction work to which the SWMS relates, then the SWMS must be kept for at least years from the occurrence of the notifiable incident.
If the construction work at the workplace has ceased within that period then the PCBU should keep the SWMS readily available for in. A SWMS must be reviewed regularly to make sure it remains effective. The review process should be carried out in consultation with workers (including contractors and subcontractors) who may be affected by the operation of the SWMS and their health and safety representatives who represented that work group at the workplace. When a SWMS has been revised the PCBU must ensure: 1. Download the JSEAsy latest version SWMS template register. SWMS is required before performing any high-risk construction work to ensure safety and proper implementation of standard operating procedures.
The Australian construction industry to ensure health and safety on construction projects and reduce common risks, as well as plaster specific risks and dangers require primary contractors and plaster subcontractors to complete a Construction SWMS (Safe Work Method Statements) as a control measure and part of their workplace safety plan and job safety analysis. PCBU must prepare a safe work method statement prior to commencing any high risk construction work. Our range of Electrical SWMS or Safe Work Method Statements cover the most common work activities associated with the Electrical industry. Whilst you can purchase generic SWMS online, they are generally only suitable for a single task, rather than the whole job.
A better way is to have Safety Resources Australia prepare an SWMS for the whole job. If you are a person conducting a business or undertaking (PCBU), it is integral to be aware of the specific regulations, standards and best practices in your industry in order to abide with prevailing rules and laws an more importantly, ensure your venture’s long term growth and viability. APPENDIX A – HIGH RISK CONSTRUCTION WORK SAFE WORK METHOD STATEMENT TEMPLATE NOTE: Work must be performed in accordance with this SWMS. This SWMS must be kept and be available for inspection until the high risk construction work to which this SWMS relates is completed. If the SWMS is revise all versions should be kept.
Some other SWMS details – Including the parties or people who helped develop and review this safe work method statement can be really important.